Quick answer

What is structured cabling in Auckland?

Structured cabling in Auckland means a single, standards-compliant Cat6/Cat6a + fibre backbone — not a patchwork of individual runs. Our installs start at $2,400 for a small-office system (12–24 ports + comms cabinet + patch panel + Fluke certification, TIA-568 standard). Designed once, installs in 2–4 days, scales for 10+ years. Lifetime cable warranty included.

●Last reviewed: May 2026 · By Namra Shah, Director

For a whole office, structured cabling sits behind a full office fit-out and workstation deployment — done by one team.

Commercial Structured Cabling

Structured Cabling Auckland — Designed, Installed & Certified

End-to-end structured cabling for Auckland offices, schools, healthcare, and industrial sites — Cat6/Cat6a copper, fibre backbone, patch panels, comms cabinets, certification. Built to TIA-568 and ISO/IEC 11801. Documented, warrantied, audit-ready.

Free site survey, single-line diagram, and itemised quote before you sign anything. No back-of-envelope numbers.
Book Free Site Survey 📞 Call 0800 222 546
Starting at
$2,400 +GST
Small Auckland office baseline — 8 outlets, 6U wall cabinet, Cat6, certified.
8–16 desk office fitoutfrom $2,400
30–60 desk mid-size fitout$8k–$18k
Comms cabinet supply & installfrom $1,200
Fluke certification per portincluded
Get My Free Survey
What is structured cabling and when do you need it?

Structured cabling is the standards-based system of cables, patch panels, comms cabinets, and pathways that connects every desk, camera, access point and phone in a building back to a central comms room. It is the ‘nervous system’ of a commercial building — designed to TIA-568 and ISO/IEC 11801 so it is documented, certifiable, and upgrade-ready for the next 10–25 years. You need structured cabling whenever you have more than 8 outlets, a comms room or rack, multiple floors, or a mix of data + voice + camera + WiFi running on the same backbone. Smaller residential jobs are usually straight Cat6 wiring — not a structured-cabling system.

10–25 yr
Design lifespan
TIA-568
Built to standard
Fluke
Certified per port
Lifetime
Cabling warranty
What's in scope

Every part of the system, one accountable installer

Structured cabling is the umbrella — here are the sub-systems we design and install under it.

🔌

Cat6 / Cat6a horizontal cabling

Copper data cabling from the comms room to every desk, camera, AP and phone. Cat6 for 1 GbE, Cat6a for 10 GbE.

See Cat6 pillar →
💡

Fibre optic backbone

OM4 multi-mode or OS2 single-mode fibre between floors, buildings, or to the carrier handoff. Splicing + termination + OTDR test.

See Fibre Optic install →
📡

Wireless point-to-point

Microwave radio backbone between buildings where fibre is uneconomic. Up to 10 Gbps, line-of-sight, days to deploy.

See Wireless Microwave →
🗄

Patch panels & comms cabinets

Wall-mount (6U–18U) and floor-standing (24U–42U) cabinets. Excel / Connectix / Panduit patch panels. Cable management, UPS, PDU.

📜

Labelling, documentation & testing

Both ends labelled to TIA-606. Fluke certification report per port. As-built PDF + Excel cable schedule handed over on completion.

🔧

Moves, adds, changes (MAC)

Office reshuffles, desk relocations, new outlet drops. Same install team so the cable schedule stays accurate. Priced per visit, no minimum.

How it works

5 steps from brief to certified handover

No call centre. No mystery quotes. No surprise sub-contractors.

1

Site survey

We walk the site, measure runs, check ceiling/floor access, review your drawings if available.

2

Design & quote

Cable schedule, comms cabinet layout, single-line diagram, BoQ. Itemised quote within 48 hours.

3

Install

Cable trays, horizontal runs, comms cabinet build, terminations. Coordinated with your fit-out programme.

4

Certify

Fluke test every port. Pass/fail report per outlet. Any fail gets remediated before handover, not after.

5

Handover

As-built drawings, port labelling, cable schedule, certification report, warranty paperwork — all in one PDF pack.

Built to the standards that auditors and landlords actually ask about

Cabling For U installs against published international standards — not “industry best practice” hand-waving.

Copper

TIA-568-D / ISO 11801

Cat6 and Cat6a horizontal cabling specification: pin-out, channel length, insertion loss, NEXT, return loss. Every port certified against this spec.

Fibre

TIA-568.3-D / ISO 11801 OM4 & OS2

Multi-mode (OM4) for inter-floor, single-mode (OS2) for inter-building and carrier handoff. OTDR-tested with written trace per fibre.

Labelling

TIA-606-C labelling & admin

Both-end labelling, cable schedule, as-built drawing, label format approved by client before install. Your next IT vendor will thank you.

Common scenarios

Who books structured cabling

🏢

New office fitout

Moving into a new tenancy, fitout in progress. Structured cabling goes in after ceiling + partitions, before flooring + furniture.

From $2,400
🏥

Healthcare / medical

Clinics, GP rooms, dental. Cat6a for imaging traffic, separate voice runs, redundant comms cabinet. Often combined with nurse call.

From $6,800
🏫

School / campus

Classroom AP drops, admin block, server room. Multi-building backbone via fibre. Funded by 5-year IT refresh budget — we phase in stages.

From $12k
🏭

Warehouse / industrial

Office cabling plus mezzanine, dispatch, security gate. Industrial-grade enclosures, sealed-end cabling for dusty environments.

From $4,800
🔗

Multi-floor head office

Fibre backbone between floors, copper to desks, dual comms cabinets for redundancy. 30–200+ outlets per floor. Phased deployment.

$40k–$120k
🔁

Cabling refresh / re-cert

Cat5e from 2008 still in service. We certify what is reusable, replace what is not. Cheaper than a rip-and-replace 95% of the time.

From $1,800
Common questions

Structured cabling FAQ

What is structured cabling?
Structured cabling is the standards-based system of cables, patch panels, comms cabinets and pathways that connects every desk, camera, access point and phone in a building back to a central comms room. Built to TIA-568 and ISO/IEC 11801 standards so it is documented, certifiable, and upgrade-ready for 10–25 years.
How much does structured cabling cost in Auckland?
A small Auckland office (8–16 desks, single comms cabinet, Cat6) starts around $2,400 +GST. A mid-size 30–60 desk fitout runs $8,000–$18,000. Large multi-floor builds with fibre backbone, dual cabinets and 200+ outlets are priced per drawing — typically $40k–$120k.
How long does a structured cabling install take?
8–16 desks: 1–2 working days. 30–60 desks: 4–8 working days. Large multi-floor: 2–6 weeks depending on cable count, ceiling access, and trade coordination. We work around your fit-out programme — ceiling, partitions, then us before flooring.
What does a structured cabling install include?
Cat6 or Cat6a horizontal cabling to every outlet, fibre backbone between floors if needed, patch panels in the comms cabinet, RJ45 wall jacks at the desk, cable management trays, labelling at both ends, Fluke certification testing on every port, written test report, and lifetime warranty on the cabling.
Cat6 vs Cat6a — which do I install?
Cat6 is right for most Auckland offices running 1 GbE to the desk. Cat6a is worth the 30% extra cost if you are running 10 GbE to the desk, have horizontal runs over 55 m, or are future-proofing for 10 years+. See our Cat6 pillar page for the full comparison.
Do you supply the comms cabinet and patch panels?
Yes. We supply and install wall-mount cabinets (6U–18U) and floor-standing cabinets (24U–42U), Excel/Connectix/Panduit patch panels, cable management, UPS and PDU. Or we install into your existing cabinet if it has spare U.
Will the install disrupt our office?
Most cable runs go through ceiling cavity or under floor tiles — no desk-by-desk disruption. Final terminations at the wall plate or floor box take 10–15 minutes per outlet. We can sequence work after hours or weekend for occupied offices.
What is Fluke certification and do I need it?
A Fluke certification test measures each cable run against the Cat6/Cat6a standard for length, attenuation, NEXT, return loss and other parameters — then prints a pass/fail report per outlet. You need it for any commercial install over 8 outlets, for landlord handover, and for your cabling warranty.
Do you do design only, or design + install?
Both. Design-only for architects, fitout firms and IT consultancies — cable schedule, comms cabinet layout, single-line diagrams, BoQ. Design + install for end clients direct. Either way we walk the site first before pricing.
Can you replace or upgrade existing structured cabling?
Yes — the most common Auckland job. We audit the existing cabling (often Cat5e installed in 2005–2015), certify what is reusable, and replace what is not. Patch-by-patch upgrade is usually cheaper than ripping the lot.

Ready to book your free site survey?

Free on-site survey. Cable schedule + itemised quote within 48 hours. Same-week start across Auckland. If we can't make the slot you booked, the survey is free.

Book Free Site Survey → 📞 0800 222 546
Relocating or fitting out an Auckland office? See our Auckland data network fit-outs guide — full-service design, install, certify, handover from $2,400.

Related reading: Cabling for schools & campuses

Already have cabling but a port is dead?See our data cable repair Auckland service — same-day callouts from $280, Fluke-tested, 3-yr workmanship warranty.

Get a free, no-obligation site inspection

We’ll visit, scope the job, and email you a fixed-price quote within 24 hours. 350+ Auckland jobs delivered, 3-yr workmanship warranty.

Book Free Inspection →
0800 222 546 Wired same day. Or it's free Free Visit 24h fixed quote

Frequently asked questions

Find answers to common questions about our Auckland cabling services, pricing and process. Can't find what you're after? Call us on 0800 222 546.

How much does network cabling cost?

Pricing depends on the number of data points, cable type (Cat6 / Cat6a / fibre) and building complexity. We provide free site surveys and upfront fixed-price quotes — no hidden costs. Most extra Cat6 outlets start from $120 +GST. Call 0800 222 546 to book yours.

Do you charge for site surveys and quotes?

No — site surveys and quotes are free. Book online or call 0800 222 546 and one of our team will come to you, assess the job, and give you a clear fixed price before any work begins.

How long does a typical install take?

A standard residential or small-office install is usually completed in a single day — often same-day. Larger commercial or enterprise projects are planned with a clear timeline given before work begins, so you always know what to expect.

Are your technicians certified and licensed?

Yes. All installs are completed to TIA/EIA and AS/NZS 3080 standards, and any associated electrical work is carried out by licensed electricians. We are fully insured with $5M public liability cover.

What areas of Auckland do you service?

We service all of Auckland — Central, North Shore, West, East and South Auckland — plus the North including Orewa, Silverdale, Warkworth, Snells Beach and Mangawhai.

Do you provide a warranty on your work?

Yes. Every cabling install is tested, documented and backed by our 3-year workmanship warranty. If anything isn't right after your install, we'll come back and fix it.

Cat6 vs Cat6a — which cable should I choose?

For most homes and small offices, Cat6 is more than enough — it handles gigabit speeds easily and is more affordable. Cat6a suits businesses running heavy data, future-proofing for 10-gigabit networks, or longer cable runs. We'll recommend the right cable during your free site survey.

How much does CCTV installation cost in Auckland?

CCTV pricing depends on the number of cameras, indoor vs outdoor placement, recording method (NVR vs cloud) and cabling required. Most residential installs sit in the $1,500–$3,500 range, with commercial systems quoted on-site. Book a free survey on 0800 222 546.

Can you install fibre optic cabling for my business?

Yes — we install indoor and outdoor fibre including OS2 single-mode and OM3/OM4 multi-mode for backbone runs, server rooms and inter-building links across Auckland. All terminations are tested and certified to AS/NZS standards.

Do you provide after-hours or emergency callouts?

Yes. Real people answer Mon–Sun, and we offer emergency callouts for downed networks, broken cabling, camera failures and business-critical outages. Call 0800 222 546 anytime.

Can you add data points to an existing home or office?

Absolutely — adding data points to existing buildings is one of our most common jobs. We minimise wall damage, label every cable and tidy patch panels so future changes are easy. Most retrofits are completed in a single visit.

NS
Reviewed by Namra Shah · Founder & Director All installs certified to TIA/EIA & AS/NZS 3080 · Auckland-owned since 2018

Still have a question about your cabling job?

Free site survey and quote, or book your job online today. Team available Mon–Sun.

Call 0800 222 546 Book a free site visit
Serving Auckland since 2018
About Cabling For U

Auckland's trusted cabling crew

Cabling For U is an Auckland-owned network cabling, fibre and security specialist, wiring homes and businesses across the city since 2018. From a single data point to a full multi-site rollout, we do it once, do it properly, and hand over the test reports.

Founded by Namra Shah, we've built our name on one simple promise — same day, or your call-out is free. Same crew every job, no sub-contractors, no call-centres. Just certified work, fixed prices and tidy installs you don't have to think about again.

350+
Jobs since 2018
4.9★
120+ Google reviews
100%
Kiwi-owned

Auckland's same-day cabling crew

Cat6, fibre, WiFi, CCTV & alarms — installed, tested and certified. Same day, or your call-out is free.

0800 222 546 Book online & save $25
Free site survey · fixed-price quote in 24 hours · Auckland-wide