Structured cabling Auckland — designed, installed & certified.
One standards-compliant Cat6/Cat6a + fibre backbone — not a patchwork of individual runs. Built to TIA-568 and ISO/IEC 11801 for offices, schools, healthcare and industrial sites. Documented, warrantied, audit-ready.
Book your free site survey
We'll confirm within 2 hours. Fixed-price quote back in 24.
No obligation · free quotes · Auckland wide
The nervous system of a commercial building
Structured cabling is the standards-based system of cables, patch panels, comms cabinets and pathways that connects every desk, camera, access point and phone back to a central comms room. Designed to TIA-568 and ISO/IEC 11801, it's documented, certifiable and upgrade-ready for the next 10–25 years.
You need it whenever you have more than 8 outlets, a comms room or rack, multiple floors, or data + voice + cameras + WiFi sharing one backbone. Smaller residential jobs are usually straight Cat6 wiring — not a structured-cabling system.
- Designed once, scales for 10+ years — installs in 2–4 days for a small office.
- Certified per port — Fluke pass/fail report against the published standard.
- Documented handover — as-built drawings, cable schedule, warranty paperwork in one PDF pack.
- Lifetime cabling warranty — plus 3-year workmanship cover, in writing.
The standards auditors & landlords ask about
We install against published international standards — not “industry best practice” hand-waving. Every deliverable is testable and written down.
Copper
Cat6 and Cat6a horizontal cabling specification — pin-out, channel length, insertion loss, NEXT, return loss. Every port is certified against this spec, not just “tested”.
- Applies to
- Desk / AP / camera runs
- Tested by
- Fluke, per port
- You receive
- Pass/fail report
Fibre
Multi-mode (OM4) for inter-floor risers, single-mode (OS2) for inter-building links and the carrier handoff. Fusion-spliced and OTDR-tested with a written trace per fibre.
- Applies to
- Risers & building links
- Tested by
- OTDR, per fibre
- You receive
- Written trace
Labelling
Both-end labelling, cable schedule and as-built drawings — label format approved by you before install. Your next IT vendor will thank you.
- Applies to
- Every cable, both ends
- Format
- Client-approved
- You receive
- As-built + schedule
Choosing between Cat6 and Cat6a? See the full comparison on our Cat6 wiring page — or ask during your free site survey.
Know the price before we quote the drawing
Most Auckland structured cabling jobs fit one of these three. Free site survey first — then a cable schedule and itemised quote within 48 hours.
Small Office
8–16 desks, single comms cabinet — the classic new-tenancy fit-out.
8 outlets, 6U wall cabinet, Cat6, certified +GST
- Cat6 horizontal runs to every desk
- 6U wall cabinet + patch panel
- Fluke certification per port, included
- TIA-606 labelling, both ends
- Installed in 1–2 working days
Mid-Size Fit-Out
30–60 desk offices — full design, install and certified handover.
Priced from your cable schedule +GST
- Cat6 / Cat6a runs to every workstation
- Floor or wall cabinet, cable management, UPS
- Fibre backbone between floors if needed
- As-builts + Fluke report + warranty pack
- Coordinated with your fit-out programme
Cabling Refresh
Cat5e from 2008 still in service? Certify what's reusable, replace what's not.
Audit + re-certification +GST
- Full audit of existing cabling
- Re-certify reusable runs, replace failures
- Cheaper than rip-and-replace 95% of the time
- Updated cable schedule + labelling
- Phased to keep you trading
Large multi-floor builds (fibre backbone, dual cabinets, 200+ outlets) are priced per drawing — typically $40k–$120k. See full Auckland cabling pricing →
Our five-step process, brief to certified handover
No call centre. No mystery quotes. No surprise sub-contractors — the same proven methodology on every Auckland job.
Site survey
We walk the site, measure runs, check ceiling and floor access, and review your drawings if available.
Design & quote
Cable schedule, comms cabinet layout, single-line diagram, BoQ — itemised quote within 48 hours.
Install
Cable trays, horizontal runs, cabinet build and terminations — coordinated with your fit-out programme.
Certify
Fluke test every port. Pass/fail report per outlet. Any fail is remediated before handover, not after.
Handover
As-built drawings, port labelling, cable schedule, certification report and warranty — one PDF pack.
Every part of the system, one accountable installer
Structured cabling is the umbrella — these are the sub-systems we design, install and certify under it. One contractor, one standard, one warranty.
Cat6 & Cat6a copper to every outlet
Copper data cabling from the comms room to every desk, camera, access point and phone — Cat6 for 1 GbE, Cat6a for 10 GbE or runs over 55 m. Every port Fluke-certified.
- Cat6 / Cat6a runs
- Cable tray & pathways
- Fluke cert per port
- TIA-568 compliant
Fibre backbones between floors & buildings
OM4 multi-mode between floors, OS2 single-mode between buildings or to the carrier handoff — fusion-spliced, OTDR-tested and certified with a written trace per fibre. Where fibre is uneconomic, we deploy wireless point-to-point microwave links up to 10 Gbps.
- OS2 & OM3/OM4
- Fusion splicing
- Inter-building links
- OTDR loss reports
Patch panels, comms cabinets, UPS & PDU
Wall-mount (6U–18U) and floor-standing (24U–42U) cabinets with Excel, Connectix or Panduit patch panels — plus cable management, UPS and PDU. Or we install into your existing cabinet if it has spare U.
- 6U–42U cabinets
- Excel / Connectix / Panduit
- UPS & PDU supply
- Cable management
Labelling, testing & moves-adds-changes
Both ends labelled to TIA-606, Fluke report per port, as-built PDF and Excel cable schedule at handover. Office reshuffle later? Same install team, so the schedule stays accurate — priced per visit, no minimum.
- TIA-606 labelling
- As-built PDF + schedule
- Fluke report per port
- MAC visits, no minimum
Who books structured cabling — and what it costs
Six jobs we quote every month across Auckland, with honest starting prices.
New office fit-out
Moving into a new tenancy. Cabling goes in after ceiling + partitions, before flooring + furniture. From $2,400.
Healthcare / medical
Clinics, GP rooms, dental. Cat6a for imaging traffic, separate voice runs, redundant comms cabinet. From $6,800.
Cabling refresh / re-cert
Cat5e from 2008 still in service? We certify what's reusable, replace what's not — cheaper than rip-and-replace 95% of the time. From $1,800.
Warehouse / industrial
Office cabling plus mezzanine, dispatch and security gate. Industrial enclosures, sealed-end cabling for dusty sites. From $4,800.
School / campus
Classroom AP drops, admin block, server room, multi-building fibre backbone — phased to your IT refresh budget. From $12k.
Multi-floor head office
Fibre between floors, copper to desks, dual cabinets for redundancy. 30–200+ outlets per floor, phased deployment. $40k–$120k.
Auckland's trusted cabling crew since 2018
Same crew every job — no sub-contractors, no call-centres. We do it once, do it properly, and hand over the test reports.
Certified technicians
Current qualifications, up to date on standards and best practice — no corner-cutting.
Local Auckland knowledge
From heritage CBD offices to modern South Auckland business parks — we know the buildings.
AS/NZS compliant
Every install meets NZ standards — essential for business continuity and insurance.
Transparent pricing
Fixed quote in 24 hours, costs discussed upfront before any work begins. No surprises.
Rated 4.9 by homes and businesses across the city
"Booked a full Cat6 fit-out for our new office. Turned up when they said, cabling is immaculate behind the rack, and every port was labelled and tested. The Fluke report made our IT company's job easy."
"Needed our whole floor re-cabled during a fit-out — 60 desks, new comms cabinet, fibre to the riser. Phased around the builders, finished on programme, and the as-built pack was the tidiest handover our IT team has seen."
"We run a busy café and needed POS, WiFi and cameras all on one system. Cabling For U handled the lot — one contractor, no finger-pointing. Coverage is rock solid now, even at the back of house."
Certified, insured and standards-compliant — every job
We're a Kiwi-owned Auckland cabling crew, not a call-centre. Every technician is qualified, every install is documented, and every cable is tested to standard before we hand over. If it's not right, we come back.
Certified technicians
Qualified, current on standards, police-checked and ID-carrying.
AS/NZS 3080 & TIA/EIA-568
Every install meets NZ and international cabling standards.
$5M public liability
Fully insured, SiteSafe member — covered on every site.
3-year workmanship warranty
Tested, documented and backed in writing on completion.
Structured cabling questions, answered
Can't find what you're after? Call us on 0800 222 546 — real people, Mon–Sun.
How much does structured cabling cost in Auckland?
How long does a structured cabling install take?
What does a structured cabling install include?
Cat6 vs Cat6a — which do I install?
Do you supply the comms cabinet and patch panels?
Will the install disrupt our office?
What is Fluke certification and do I need it?
Do you do design only, or design + install?
Can you replace or upgrade existing structured cabling?
Areas we cable across Auckland
Based in Auckland and on the road daily — from the CBD to the far reaches of North, West, South and East, plus Hibiscus Coast and up to Mangawhai.
Central & Isthmus
North Shore & Hibiscus Coast
West Auckland
East Auckland
South Auckland
Ready to book your free site survey? Quote in 48 hours.
Free on-site survey, cable schedule and itemised quote within 48 hours. Same-week start across Auckland — and if we can't make the slot you booked, the survey is free.